Abstract
Reducing the operating energy of a distributed feedback (DFB) laser is a critical issue if we are to use the device as a directly modulated light source employing wavelength division multiplexing technologies in short-distance datacom networks. A membrane buried heterostructure (BH) DFB laser on a SiO2 layer is one candidate for reducing the operating energy because it provides a strong carrier and optical confinement in the active region. For low-cost fabrication, we have proposed and developed a fabrication procedure that employs the buried growth of an InP layer by using a directly bonded InP-based active layer on a SiO2/Si substrate, which enables us to use a large-scale Si wafer. To overcome the problem of the difference between the thermal expansion coefficients of Si, SiO2, and InP, we have used a thin active layer (∼250 nm) on a SiO2/Si substrate as a template for the epitaxial growth of a III–V compound semiconductor. A lateral current injection structure is essential for fabricating a device with a 250-nm-thick template. Our fabricated DFB laser with a 73-μm cavity length exhibits a threshold current of 0.9 mA for continuous operation at room temperature and achieves lasing at up to 100 °C. We have also demonstrated 171-fJ/bit operation with a 25.8-Gb/s NRZ signal. These results indicate that the BH DFB laser on a SiO2/Si substrate is highly suitable for use as a transmitter for datacom applications.
© 2014 IEEE
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription