Abstract

Tip clearance is critical to the performance of rotating turbomachinery. The objective of this paper is to develop a noncontact sensor with a precision of 30 μm to measure tip clearance in a turbine rig assembled in a wind tunnel. To carry out the measurements, an optical sensor whose main component is a bundle of optical fibers is employed. We use four different configurations of this sensor, which are tested in two distinct turbines with the aim of minimizing the effect of the noise on the repeatability of the measurements. Each configuration serves to increase the precision until the required performance is achieved for the measurement of the tip clearance. Our results may be helpful to develop applications related to structural health monitoring or active clearance-control systems.

© 2015 IEEE

Fiber-optic laser Doppler turbine tip clearance probe

Lars Büttner, Thorsten Pfister, and Jürgen Czarske
Opt. Lett. 31(9) 1217-1219 (2006)

Optical-fiber-based dynamic measurement system for 3D tip clearance of rotating blades

Xiaodong Zhang, Yiwei Xiong, Siying Xie, and Hongcheng Liu
Opt. Express 27(22) 32075-32095 (2019)

Output characteristics of two-circle coaxial optical fiber bundle with regard to three-dimensional tip clearance

Siying Xie, Xiaodong Zhang, Bing Wu, and Yiwei Xiong
Opt. Express 26(19) 25244-25256 (2018)

Low-coherence interferometric tip-clearance probe

Andreas Kempe, Stefan Schlamp, Thomas Rösgen, and Ken Haffner
Opt. Lett. 28(15) 1323-1325 (2003)

Demodulation technique for 3-D tip clearance measurements based on output signals from optical fiber probe with three two-circle coaxial optical fiber bundles

Siying Xie, Xiaodong Zhang, Yiwei Xiong, and Hongcheng Liu
Opt. Express 27(9) 12600-12615 (2019)