Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Journal of Lightwave Technology
  • Vol. 32,
  • Issue 19,
  • pp. 3247-3256
  • (2014)

Digital Preemphasis in Optical Communication Systems: On the DAC Requirements for Terabit Transmission Applications

Not Accessible

Your library or personal account may give you access

Abstract

Next-generation coherent optical systems are geared to employ high-speed digital-to-analog converters (DAC), allowing for digital preprocessing of the signal and flexible optical transport networks. However, one of the major obstacles in such architectures is the limited resolution (less than 5.5 effective bits) and –3 dB bandwidth of commercial DACs, typically limited to half of the currently commercial baud rates, and even relatively reduced in case of higher baud rate transponders (400 Gb/s and 1 Tb/s). In this paper, we propose a simple digital preemphasis (DPE) algorithm to compensate for DAC-induced signal distortions, and exhaustively investigate the impact of DAC specifications on system performance, both with and without DPE. As an outcome, performance improvements are established across various DAC hardware requirements (effective number of bits and bandwidth) and channel baud rates, for m-state quadrature amplitude modulation (QAM) formats. In particular, we show that lower order modulation formats are least affected by DAC limitations, however, they benefit the most from DPE in extremely challenging hardware conditions. On the contrary, higher order formats are severely limited by DAC distortions, and moderately benefit from DPE across a wide range of DAC specifications. Moreover, effective number of bit requirements are established for m-state QAM, assuming low and high baud rate transmission regimes. Finally, we discuss the application scenarios for the proposed DPE in next-generation terabit transmission systems, and establish maximum transportable baud rates, which are shown to be used toward increasing channel baud rates to reduce terabit subcarrier count or toward increasing forward error correction (FEC) overheads to reduce the pre-FEC bit error rate threshold. Maximum baud rates after DPE are summarized here for polarization multiplexed BPSK, QPSK, 8QAM, and 16QAM, assuming two DACs: Current commercial DACs (5.5 effective bits, 16 GHz bandwidth) 57, 54, 51, and 48 Gbaud, respectively. Next-generation DACs (7 effective bits, 22 GHz bandwidth): 62, 61, 60, and 58 Gbaud, respectively.

© 2014 IEEE

PDF Article
More Like This
4-bit DAC based 6.9Gb/s PAM-8 UOWC system using single-pixel mini-LED and digital pre-compensation

Chen Cheng, Xueyang Li, Qian Xiang, Jun Li, Yongchao Jin, Zixian Wei, H. Y. Fu, and Yanfu Yang
Opt. Express 30(15) 28014-28023 (2022)

Single-carrier 72 GBaud 32QAM and 84 GBaud 16QAM transmission using a SiP IQ modulator with joint digital-optical pre-compensation

Jiachuan Lin, Hassan Sepehrian, Leslie A. Rusch, and Wei Shi
Opt. Express 27(4) 5610-5619 (2019)

Terabit bandwidth-adaptive transmission using low-complexity format-transparent digital signal processing

Qunbi Zhuge, Mohamed Morsy-Osman, Mathieu Chagnon, Xian Xu, Meng Qiu, and David V. Plant
Opt. Express 22(3) 2278-2288 (2014)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.