Abstract
In this paper, we present an experimental investigation of 40 Gb/s transmission technology aimed at an aggregate capacity exceeding 1 Tb/s over multithousand kilometer transmission distances. These studies have been performed using a variety of dispersion management and modulation techniques. The transmission distances investigated range from a minimum of 2000 km, which is considered a regional undersea cable distance, up to a transatlantic distance of 6200 km. Our regional distance experiments were performed using both slope-matched and conventional dispersion maps where the accumulated dispersion becomes large for the edge channels. Dispersion map studies showed that slope-matched fiber performs better than nonslope-matched fiber (NZDSF) beyond 2000 km due to its larger effective area and lower accumulated dispersion slope. The demonstration of 38 × 40 Gb/s over 6200 km was the first transoceanic length experiment using 40 Gb/s DWDM channels. This was achieved with a relatively simple amplifier chain that uses only C-band EDFAs. Modulation format studies showed that RZ performs better over transoceanic distance, carrier-suppressed RZ performs better with nonslope-matched fiber at a distance of 2055 km, and prefiltered carrier-suppressed RZ is more suited for higher spectral efficiency. Experimental techniques for high bit-rate experiments are presented.
[IEEE ]
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription