Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Journal of Lightwave Technology
  • Vol. 17,
  • Issue 4,
  • pp. 546-
  • (1999)

Power Minimization and Technology Comparisons for Digital Free-Space Optoelectronic Interconnections

Not Accessible

Your library or personal account may give you access

Abstract

This paper investigates the design optimization of digital free-space optoelectronic interconnections with a specific goal of minimizing the power dissipation of the overall link, and maximizing the interconnect density. To this end, we discuss a method of minimizing the total power dissipation of an interconnect link at a given bit rate. We examine the impact on the link performance of two competing transmitter technologies, vertical cavity surface emitting lasers (VCSEL's) and multiple quantum-well (MQW) modulators and their associated driver-receiver circuits including complementary metal-oxide-semiconductor (CMOS) and bipolar transmitter driver circuits, and p-n junction photodetectors with multistage transimpedance receiver circuits. We use the operating bit-rate and on-chip power dissipation as the main performance measures. Presently, at high bit rates ({>}800 Mb/s), optimized links based on VCSEL's and MQW modulators are comparable in terms of power dissipation. At low bit rates, the VCSEL threshold power dominates. In systems with high bit rates and/or high fan-out, a high slope efficiency is more important for a VCSEL than a low threshold current. The transmitter driver circuit is an important component in a link design, and it dissipates about the same amount of power as that of the transmitter itself. Scaling the CMOS technology from 0.5 \mum down to 0.1 \mum brings a 50% improvement in the maximum operating bit rate, which is around 4 Gb/s with 0.1 \mum CMOS driver and receiver circuits. Transmitter driver circuits implemented with bipolar technology support a much higher operating bandwidth than CMOS technology; they dissipate, however, about twice the electrical power. An aggregate bandwidth in excess of 1 Tb/s-cm2 can be achieved in an optimized free-space optical interconnect system using either VCSEL's or MQW modulators as its transmitters.

[IEEE ]

PDF Article
More Like This
Speed and energy analysis of digital interconnections: comparison of on-chip, off-chip, and free-space technologies

Gökçe I. Yayla, Philippe J. Marchand, and Sadik C. Esener
Appl. Opt. 37(2) 205-227 (1998)

Digital free-space optical interconnections: a comparison of transmitter technologies

Chi Fan, Barmak Mansoorian, Daniel A. Van Blerkom, Mark W. Hansen, Volkan H. Ozguz, Sadik C. Esener, and Gary C. Marsden
Appl. Opt. 34(17) 3103-3115 (1995)

Performance-based adaptive power optimization for digital optical interconnects

Xiaoqing Wang, Fouad Kiamilev, George C. Papen, Jeremy Ekman, Ping Gui, Michael J. McFadden, Joseph C. Deroba, Michael W. Haney, and Charles Kuznia
Appl. Opt. 44(29) 6240-6252 (2005)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved